Email: truman.lau@outlook.com
Tel: +86 13783197063
Steel reinforcement processing machine series
SWG12 CNC Stirrup bending machine
GT1500-2500 Steel reinforcement cage seam welder
GT2300 Tunnel steel mesh welding machine
GT50 Taper pipe end forming machine
GT5000 CNC Taper pipe punching machine
Shotcrete machine series
GYP-90 Hydraulic wet shotcrete machine
PZ-7D Dry shotcrete machine
GHP20A Truck-mounted wet shotcrete machine
GHP30G-IV Engineering concrete wet spraying trolley
GSPB25T Diesel wet concrete spraying trolley
Smaller air consumption when compared with other pneumatic rock drills on the market , same air compressor can connect more rock drills and greatly improve working efficiency.
With forging technology,lower rotational speed at the same drilling depth,making drill more durable.
Accessories of strong universality,easy maintenance.
Drill of energy-saving,high efficient ,sturdy and durable,easy maintenance,high reliability.
Centralized operation mechanism,flexible start,adopting air-water linkage ,air-leg rapidly return ,pressure adjustment ;Easier operation,the function of blowing the blasthole is strong, and ,the turning torque is large and superior to similar models.
Accessories of strong universality,when replace the product,users will not lose profit.
Control handle is concentrated with the handle body and the mechanism is novel and convenient to operate. The muffler effectively reduce the noise and change exhausting direction freely to improve working conditions.compared with same models :light weight ,low noise ,high efficiency ,good economic effect.
Model | YT28 |
Cylinder diameter | 80mm |
Piston stroke | 60mm |
Impact energy | ≥70(0.63Mpa) |
Impact frequency of drilling | ≥37(0.63Mpa) |
Drilling speed | ≥(0.63Mpa) |
Air consumption | ≥81.6(0.63Mpa) |
Air pipe inner diameter | 25mm |
Water pipe inner diameter | 13(10)mm |
Working pressure | 0.63Mpa |
Working water pressure | 0.2Mpa |
Applicable hole diameter | 34-45mm |
Maximum hole depth | 5m |
Air consumption/per meter | 10.2×103L/m |
Drill rod tail size | H22×108 |
Working temperature | -30°~+50° |
Machine weight | 27.8kg |
Dimension | L670×W240×H210mm |
Want To Discuss About Your Machine Needs?