Email: truman.lau@outlook.com
Tel: +86 13783197063
Steel reinforcement processing machine series
SWG12 CNC Stirrup bending machine
GT1500-2500 Steel reinforcement cage seam welder
GT2300 Tunnel steel mesh welding machine
GT50 Taper pipe end forming machine
GT5000 CNC Taper pipe punching machine
Shotcrete machine series
GYP-90 Hydraulic wet shotcrete machine
PZ-7D Dry shotcrete machine
GHP20A Truck-mounted wet shotcrete machine
GHP30G-IV Engineering concrete wet spraying trolley
GSPB25T Diesel wet concrete spraying trolley
Four-wheel drive chassis ,higher mobility and stronger climbing ability.
External accelerator barrels to save internal space,making installation and maintenance more convenient.
Remote wireless control,convenient and practical.
Easy to clean and maintain the filter ,prolong its service life.
Machine with reasonable layout ,compact structure and bright colors,vehicle with good looking and perfect coordination.
With dual pump hydraulic system to reduce the residence time of slave cylinder piston and weaken the pulse ,operating reliably with non-interfering.
Platform cover with ladder design to reduce the frame and makes appearance neater ; shortening the hood to save its manufacture cost and painting cost .
Equipped with storage platform,easy to deliver goods.
Voice remind to add air pressure ,mitigating the wind pressure and adding accelerator,bell rings when reduce the accelerator,which makes easier communication between spray-workers and operators, making construction more convenient.
Standard configurations : dual spray nozzles are placed in the truck rear and no frame pump pipes to reduce the cost of whole vehicle; Top-glass luxury fittings and reserve the space for frame pump pipes,high-configuration models for optional ,and dual spray nozzles are placed in the front.
Item | Basic Performance | Parameters |
Machine data | Dimension | L6700*W2000*H2500mm |
Total weight | 5750kg | |
Pumping system | Production capacity | 20m³/h |
Cylinder bore | 140mm | |
Pumping stroke | 1000mm | |
Delivery pipe diameter | Φ125mm | |
Outlet pressure of concrete | 7.0bar | |
Hopper volume | 0.3m³ | |
Feeding height | 1450mm | |
Distribution valve of concrete | S tube valve | |
Lubrication system | Auto | |
Concrete slump | 120-180mm | |
Cooling way | Air cooling | |
Dust around the machine | <6Mg/m³ | |
Resilience rate | <10% | |
Maximum aggregate diameter | Φ15mm | |
Water-cement ratio | 0.45~0.6 | |
Traveling chassis | Engine power | 46kw |
Wheelbase | 2900mm | |
Maximum traveling speed | 40km/h | |
Maximum climbing degree | 30% | |
Braking way | Air cutting brake | |
Accelerator system | Accelerator pump model | G30-1 |
Driving way | Hydraulic drive | |
Accelerator displacement | 0~500L | |
Maximum pressure of accelerator | 20bar | |
Hydraulic system | Main motor power | 45KW |
Fuel tank capacity | 200L | |
Mater cylinder pressure | 17Mpa | |
Main pump displacement | 100ml/r |
Want To Discuss About Your Machine Needs?