Email: truman.lau@outlook.com
Tel: +86 13783197063
Steel reinforcement processing machine series
SWG12 CNC Stirrup bending machine
GT1500-2500 Steel reinforcement cage seam welder
GT2300 Tunnel steel mesh welding machine
GT50 Taper pipe end forming machine
GT5000 CNC Taper pipe punching machine
Shotcrete machine series
GYP-90 Hydraulic wet shotcrete machine
PZ-7D Dry shotcrete machine
GHP20A Truck-mounted wet shotcrete machine
GHP30G-IV Engineering concrete wet spraying trolley
GSPB25T Diesel wet concrete spraying trolley
This machine has stable performance,less wearing parts and low maintenance cost.
Electric equipment is centralized control by PLC with reliable performance ,long service life ,programmed working and easy operation.
Accelerator addition could be adjusted continuously ,and making stepless adjustment according to spray quantity.
Small grouting pulsation,good continuity.
Delivery capacity can be adjusted as needed ( Switching swing frequency ≤16).
Equipped with automatic lubrication system to lubricate main sealed parts ,and automatically control grease filling quantity and filling time ,which greatly prolong the life of wearing parts.
Wire-controlled handle,easier to operate.
Basic performance | Parameters |
Production capacity | 3-7m³/h |
System pressure | 16Map |
Outlet pressure of concrete | 6Mpa |
Main motor power | 22KW |
Cylinder bore×stroke | 140*580mm |
Hopper volume | 0.3m³ |
Cement ratio | 0.45-0.6 |
Workin wind pressure | 0.4-0.6 |
Feeding height | 1150mm |
Maximum aggregate diameter | 15mm |
Distribution valve of concrete | S tube valve |
Lubrication system | Manual +auto |
Slump of concrete | 120-180mm |
Fuel tank volume | 145L |
Cooling way of hydraulic oil | Air cooling |
Dust around the machine | <6mg/m³ |
Resilient rate | ≤10% |
Machine weight | 1950kg |
Dimension | 3250×1550×1650mm |
Want To Discuss About Your Machine Needs?